Toshiba e-studio550 Service Manual page 138

(5) Remove 4 screws (2 in the front and 2 in the
rear side) and take off the guide.
Remove 2 E-rings (1 in the front and 1 in the
rear side) and take off the transport roller.
(6) Disconnect 1 connector, remove 2 screw and
take off the solenoid.
[B] Transport unit
(1) Disconnect 1 connector and remove 2 screws
to take off the transport unit.
JUNE 2002 © TOSHIBA TEC
E-ring
REAR
E-ring
FRONT
9 - 15 e-STUDIO550/650/810 PAPER FEEDING SYSTEM
Connector