Enabling Dynacolor - Barco Galaxy NH-12 User Manual

Factory Preset
Calibration
Default Desired
Image 7-153
7.9.7.2

Enabling DynaColor

What can be done ?
Enabling the DynaColor will change the colors to the desired colors filled in the DynaColor menu. Disabling DynaColor will keep the
original colors determined by the source and the projector's optical path.
How to start up Dynacolor?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
R59770122 BARCO GALAXY NH-12 04/05/2011
Sets the measured parameters back to the factory preset for the current set
This starts the calibration procedure for the measured points of the current set (Changing these
settings may seriously affect the performance of the projector).
This will reset the desired parameters to no color change values (measured values). This can be
interesting to recalculate the secondary colors.
7. Advanced
137