Print In Transaction Printing Mode - Canon imagePRESS C800 Series Operation Manual

Print in transaction printing mode

Print in transaction printing mode
When the transaction mode is active, you select a transaction setup that matches your print
requirements. Create new transaction setups in the Settings Editor.
When the alignment of the variable data is not correct, you adjust the image shift via the control
panel or via a transaction printing setup with a preset defined image shift. The image shift is
visible on all printed output from all paper trays.
For more information, see:
Transaction printing on page 87
Before you begin
Make sure the list of scheduled jobs is empty.
Procedure
1.
Touch [System] -> [Transaction] -> [Transaction printing mode] -> [On].
2.
Touch [Active transaction setup] to select a transaction setup.
3.
Load the media into the paper trays, if the tray-to-tray media assignment is active.
4. Touch [System] -> [Transaction] ->[Transaction online] -> [On]
5.
Touch the + or - buttons to shift the image, if required.
6. Establish the connection from the host or mainframe to the print system and submit the jobs.
7.
Monitor the jobs on the control panel, to make sure that all jobs are printed.
After you finish
To switch off the transaction printing mode:
1. Touch [System] -> [Transaction] ->[Transaction online] -> [Off]
2. Touch [System] -> [Transaction] -> [Transaction printing mode] -> [Off].
90 Chapter 4 - Plan the jobs
imagePRESS C800 Series