Canon imagePRESS C800 Series Operation Manual page 88

Transaction printing
3. When the transaction printing jobs contain paper tray selection numbers, you can select a
mapping method. The paper tray number corresponds to a physical tray or to media from the
catalog:
• Tray-to-media mapping
You can assign the paper tray number included in the print job to a physical paper tray.
• Tray-to-tray mapping
You can assign the paper tray number included in the print job to media in the media
catalog.
4. Color management in the transaction mode works in a similar way to the document printing
mode. However, there are some different color conversion functions:
• You cannot overrule the input profiles attached to the data stream.
• You can choose to keep or ignore the output color profile in the data stream.
• You cannot calibrate the printer when the transaction printing mode is active.
Transaction printing setups
A transaction printing setup is a collection of preset print settings for a transaction job, such as
output location, data resolution, face orientation, offset stacking, font capture, and logical page
size.
Create transaction printing setups in the Settings Editor. (See
Work in transaction printing mode
When you want to print in the transaction printing mode, first activate the transaction mode and
establish the connection with the IPDS or PCL host. When you print in the transaction printing
mode, the schedule informs you which types of media the streaming job uses. The schedule
cannot predict the time needed for a streaming job. (See
[41] The schedule when the transaction printing mode is active
88 Chapter 4 - Plan the jobs
System configuration on page
Schedule on page
122)
182)
imagePRESS C800 Series