Clean The Glass Plate Area - Canon imagePRESS C800 Series Operation Manual

Clean the glass plate area

Clean the glass plate area
Clean the automatic document feeder and the glass plate in order that the scanner can scan the
originals correctly and can detect the size of the originals.
You can use water or water mixed with a mild cleaning agent to clean. Use the cleaning cloth
provided. When the cleaning cloth becomes dirty, wash and rinse it, and then leave to dry.
[121] Location of the glass plate
WARNING
• When you clean the machine, first turn OFF the main power switch, and disconnect the
power cord. Failure to observe these steps can result in a fire or electrical shock.
• Disconnect the power cord from the power outlet regularly, and clean the area around the
base of the power plug's metal pins and the power outlet with a dry cloth to ensure that all
dust and grime is removed. If the power cord is connected for a long period of time in a
damp, dusty, or smoky location, dust can build up around the power plug and become damp.
This can cause a short circuit and may result in a fire.
IMPORTANT
• Do not dampen the cloth with too much water. This can damage prints or machine parts.
• Do not use alcohol, benzene, paint thinner, or other solvents to clean machine parts. This can
damage plastic machine parts.
Procedure
Action
1 Moisten the cloth with water or a mild cleaning agent and wring it out thoroughly.
2 Clean the glass plate (1) and the underside of
the automatic document feeder (2) with the
cloth.
3 Wipe dry with a soft, dry cloth.
216 Chapter 7 - Maintain the print system
imagePRESS C800 Series