Standard Stacker / Stapler - Canon imagePRESS C800 Series Operation Manual

Standard stacker / stapler

There are two standard stacker / stapler configurations: the stacker / stapler with and without a
booklet maker. The booklet maker folds and staples booklets. Both finisher configurations can
enable the optional punch unit to punch two, three or four holes in the printed output.
The dashboard of the control panel displays the status of the staple cartridges. When the color of
the staple icon is orange or red, the staple cartridge needs replacement. (See
on page 120)
9
8
7
6
5
[17] Standard stacker / stapler with and without booklet maker.
Description stacker / stapler
1 Cover, to access the paper path when a paper jam occurs.
2 Punch unit cover, to access the paper path when a paper jam occurs.
3 Punch unit cover, to remove the punch waste or to access the paper path when a pa-
per jam occurs.
4 Cover, to access the area where you replace staple cartridges, clear a paper jam, or
clear a staple jam.
5 Booklet tray, to collect booklets.
6 Auxiliary booklet tray, to collect large booklets.
7 Lower tray, to collect finished output.
8 Upper tray, to collect finished output.
9 Top tray, to collect finished output.
See for specifications:
Finishing and delivery specifications on page 274
Finishing for your output on page 23
imagePRESS C800 Series
1 2
9
8
3
7
4
Standard stacker / stapler
System monitoring
1
4
Chapter 2 - Explore the print system 45