Fix "Density Not Within Required Range" Error - Canon imagePRESS C800 Series Operation Manual

Fix "density not within required range" error

In exceptional cases the shading correction procedure fails with a "density not within required
range" message. If this happens, perform the correction procedure to fix the problem.
Procedure
1.
Touch [System] -> [Color adjustment] -> [Printer calibration details].
2.
Select [Auto gradation adjustment].
3.
Select [Shading correction].
4.
Press [Start printer calibration].
5. Follow the instructions on the control panel.
6.
Touch [System] -> [Color adjustment] -> [Printer calibration details].
7. Deselect [Shading correction].
8.
Select [Auto gradation adjustment].
9.
Press [Start printer calibration].
10.
Follow the instructions on the control panel.
11.
Close the menu.
After you finish
If the [Shading correction] procedure still fails, contact your local service representative.
imagePRESS C800 Series
Fix "density not within required range" error
Chapter 8 - Help 233