Load Media Into The Internal Paper Trays - Canon imagePRESS C800 Series Operation Manual

Load media into the internal paper trays

Each of the three internal paper trays can hold up to 550 sheets (80 g/m² / 22 lb bond). The paper
trays feed the media face down.
There is no sensor in the paper trays that can detect the media. After you open and close a paper
tray, the print system will not change the media settings.
When you load envelopes in an internal paper tray, you need the envelope guide (Envelope
Feeder Attachment-F1). (See
[77] Location of the internal paper trays
IMPORTANT
• Never place paper or other objects in the empty parts of a paper tray. This can cause a paper
jam.
• Make sure you follow the instructions carefully. When you do not load the media correctly, a
paper jam, dirty machine parts, or poor print quality can occur.
CAUTION
When you handle paper, be careful not to cut your hands on the edges of the paper.
For more information, see:
Access the print module parts on page 228
Paper input specifications on page 270
Consumables on page 185
Supported media types for paper input optionals on page 289
Supported media sizes by paper input optional on page 291
Supported envelope types by paper input optional on page 292
Before you begin
• Check and prepare the media. See:
Check and prepare media before loading on page 130
Check and prepare transparencies before loading on page 134
• Awake the print system from sleep mode, if applicable. See:
Use the energy save modes on page 192
imagePRESS C800 Series
Load envelopes into the internal paper trays on page
Load media into the internal paper trays
149)
Chapter 5 - Print the jobs 135