Refresh The Fixing Belt - Canon imagePRESS C800 Series Operation Manual

Refresh the fixing belt

Refresh the fixing belt
After the print system has printed more than 100 sheets of a specific paper size, for example A4 /
LTR, and then prints on a larger paper size, for example A3 / 11" x 17", luster streaks (ghost
printing) can appear on both sides of the paper. Refresh the fixing roller to correct this problem.
You can also perform this procedure when you use heavy or coated paper and patches of uneven
gloss appear in the high density printed areas.
A4
[123] The feed direction of paper path (1) and luster streaks (2)
IMPORTANT
Only perform this procedure in urgent situations, because this procedure can largely decrease
the lifetime of the fixing roller.
Before you begin
Make sure the print system does not process any jobs.
Procedure
1.
Touch [System] -> [Maintenance].
2. Touch [Start maintenance].
3.
Enter your maintenance PIN.
4.
Touch [Refresh the fixing belt].
5.
Follow the wizard steps.
6.
Close the menu.
After you finish
IMPORTANT
If the procedure fails or if you do not achieve the required result, contact your local service
representative.
224 Chapter 7 - Maintain the print system
1
A3
2
imagePRESS C800 Series