Change Job Settings - Canon imagePRESS C800 Series Operation Manual

Change job settings

Change job settings
Most job settings are created during the job preparation. You can decide to change the print job
settings after you checked the first set of a print job, after a proof, or after you print a job ticket.
You change the settings in one of the following locations:
• List of scheduled jobs
• List of waiting jobs
• A DocBox
1
2
[56] Print job settings
For more information, see:
Job management in the queues on page 99
Print job settings on page 242
Change a DocBox job on page 92
Procedure
1.
Press [Jobs].
2.
Go to the location of the job.
3.
Select the job you want to change.
4. Touch [Properties], or double-tap the job to open the [Properties] window.
5.
Check the job information in the [Original] pane (1).
6. Change the settings in the [Output] pane (2).
7.
Change the settings in the [Job] pane (3).
8.
Use the optional [Page programming] function (5), if required.
9.
Check the results of the changed settings in the preview pane (4).
10.
Touch [OK] (5).
106 Chapter 4 - Plan the jobs
4
5
imagePRESS C800 Series