Canon imagePRESS C800 Series Operation Manual page 200

Replace in the professional stacker / stapler the staple cartridge in the staple unit
Procedure
Action
1 Open the front cover of the stacker/stapler.
2 Hold the green tab of the staple case and pull it
out.
3 Take out the empty staple cartridge (1) and in-
sert a new staple cartridge (2).
4 Remove the seal that holds the staples togeth-
er.
5 Gently push the staple case into the staple unit
as far as possible.
6 Close the front cover of the stacker/stapler.
200 Chapter 7 - Maintain the print system
NOTE
When the staple unit is at the back, it
is difficult to pull out the staple case.
If this happens, turn the dial on the
bottom left-hand side to the left to
move the staple unit.
CAUTION
When you close the front cover of
the stacker/stapler, be careful not to
get your fingers caught. This can
cause personal injury.
imagePRESS C800 Series