Finishing for your output
If your print system has finishing options, you can select staple, punch, trim, booklet and book
options in the printer driver, the PRISMA software, and the control panel.
NOTE
The control panel shows the finishing options that are available on your print system.
Below you find an overview of the finishing options the print system supports.
Stapling
Stapling options
Corner stapling
The feed direction of originals is important for stapled copies.
page 251
(See )
Booklet making
Booklet options
Saddle-stitched booklet
Saddle-stitched booklet, leading-edge trimmed
Saddle-stitched booklet, trimmed at three
sides
imagePRESS C800 Series
2-side stapling
Finishing optional
Stacker/stapler
Feed direction for stapling on
Finishing optionals
Stacker/stapler
Saddle-stitch unit
Stacker/stapler
Saddle-stitch unit
Booklet trimmer
Stacker/stapler
Saddle-stitch unit
Booklet trimmer
Two-knife booklet trimmer
Chapter 2 - Explore the print system
Finishing for your output
23