Use The Energy Save Modes - Canon imagePRESS C800 Series Operation Manual

Use the energy save modes

Use the energy save modes
The Settings Editor and the control panel have settings for the energy save modes.
The system goes into the low power mode when there is no activity during a predefined period.
You can define this period. The system awakes when a job arrives in the list of scheduled jobs or
when you use the control panel.
The control panel has a sleep button to enable the sleep mode. You can use the same button to
awake the controller from sleep mode. During the sleep mode the controller remains on, but the
control panel light is off. The sleep mode will be entered after a timer has expired. You can
configure the timer in the Settings Editor.
For more information, see:
System configuration on page 182
Control panel on page 36
Procedure
1.
Press the sleep button
2.
Press the sleep button
192 Chapter 7 - Maintain the print system
at the right-hand side of the control panel.
again to awake the system.
imagePRESS C800 Series