Make A Scan - Canon imagePRESS C800 Series Operation Manual

Make a scan

Make a scan
You can start a scan job from the automatic document feeder or the glass plate. When the scan
area has scanned the originals, the scan file goes to the destination you indicated.
1
2
For more information, see:
About scan jobs on page 57
Scan job settings on page 240
Use templates for recurring jobs on page 66
Scan subsets (combined scanning) on page 68
Before you begin
Read the instructions detailing how to use the automatic document feeder and the glass plate.
Use the automatic document feeder to copy or scan on page 59
(See
copy or scan on page
Procedure
1. Place a set of originals into the automatic document feeder or place an original on the glass plate.
2.
Touch [Jobs] -> [Copy/Scan].
3.
Select a scan template.
4.
Define the original settings in the [Original] pane (1).
5.
Define the output settings in the [Output] pane (2).
6. Select the destination of the scan file in the [Job] pane (3).
• For scanning to email, define the subject of the email, the addresses and your account ID.
• For scanning to USB, insert the USB drive into the USB port and select the required folder on
the drive.
7. Enter a job name and a file name ID (3).
8.
Check the results of your settings in the preview pane (4).
64 Chapter 3 - Prepare the jobs
5
61)
3
4
or
Use the glass plate to
imagePRESS C800 Series