Canon imagePRESS C800 Series Operation Manual page 168

Adjust CMYK curves for a single job
[95] Advanced mode
For more information, see:
Print job settings on page 242
Before you begin
Perform a printer calibration. (See
Procedure
1.
Press [Jobs].
2. Go to the location of the job.
3.
Select the job.
4. Touch [Properties] -> [Adjust image].
The [Basic mode] window opens.
5.
Make the adjustments:
• Use the color slide bars to adjust the curves by color.
• Use the + and - sign to the right of the K bar to adjust the density in one step.
6. Touch [Advanced mode] at the upper-right corner of the view, if required.
The window opens with the color Cyan.
On the right-hand side, you can select the color.
On the left-hand side, you can select the areas.
7. Define the clipping ranges with the [Color clipping] settings, if required.
8.
Adjust the calibrated CMYK curve with the three control points on the CMYK curves, if required.
9.
Save the adjustments as a preset for later use, if required.
168 Chapter 6 - Keep the image quality high
Calibrate the printer on page
162)
imagePRESS C800 Series