Replace in the standard stacker /stapler the staple cartridge in the
saddle-stitch unit
The dashboard of the control panel indicates if the staple cartridges need replacing. You can find
the saddle-stitch unit in the stacker/stapler.
[115] Location of the saddle-stitch unit
IMPORTANT
• For information on the Canon genuine staple cartridges, see
• Be careful when you perform maintenance tasks on optionals attached to the machine. When
you perform a maintenance task, such as replace a staple cartridge, remove waste, or solve
jams, other machine parts can continue with job process activities.
• Remove the printed output from the booklet tray before you replace the staple cartridge in the
saddle-stitch unit.
NOTE
• We recommend ordering staple cartridges from your local authorized Canon dealer before
your stock runs out.
• When a staple cartridge is empty, replace both cartridges.
• Only use staple cartridges intended for your print system.
[116] Staple Cartridge-D2 / Staple Cartridge-D3 for Booklet Finisher-T1
For more information, see:
Check the filling level of the staple cartridge on page 128
Standard stacker / stapler on page 45
System monitoring on page 120
Before you begin
Remove printed output from the booklet tray.
imagePRESS C800 Series
Replace in the standard stacker /stapler the staple cartridge in the saddle-stitch unit
Consumables on page
Chapter 7 - Maintain the print system
185.
207