Change or disable the warning time
Change or disable the warning time
The dashboard and the operator attention light warn you when the schedule predicts an operator
intervention. You can change or disable the warning time.
For more information, see:
System monitoring on page 120
Status indicators on page 264
Schedule on page 122
Procedure
1.
Touch [System] -> [Setup] -> [Warning time].
2.
Touch [Warning in advance] to enable or disable the function.
3.
Touch the - or + button to decrease or increase the warning time in increments of 1 minute.
Set a time from 1 - 60 minutes.
4.
Press [OK].
82
Chapter 4 - Plan the jobs
imagePRESS C800 Series