Replacing the Staple Cartridge in the Saddle Stitcher Unit
When the saddle stitcher unit of the optional Saddle Finisher-AD2 is almost out of
staples, and the staple cartridge must be replaced, a screen similar to the one
shown below appears on the touch panel display. Follow the procedure described
below to replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
IMPORTANT
•
This procedure is necessary only if the optional Saddle Finisher-AD2 is attached.
•
If necessary, remove all of the output paper in the Booklet Tray before replacing the
7
staple cartridge in the saddle stitcher unit.
NOTE
We recommend that you order staple cartridges from your local authorized Canon dealer
before your stock runs out.
1
7-36
Finisher-AD1/Saddle Finisher-AD2/Puncher Unit-AT1 (Optional)
Open the front cover of the finisher.