Change the job settings before printing
Change the number of sets
Introduction
Follow the procedure below to change the number of sets for a job that is present in the
list of 'Waiting jobs' or 'Scheduled jobs'.
How to change the number of sets
Touch -> 'Waiting jobs'.
1.
Touch the job of which you want to change the number of sets.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button 2x).
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
3.
Touch the 'Number of sets' button.
4.
Enter the desired number of sets (between 1 and 65,000).
5.
#
NOTE
Touch the arrow button <- to correct the previous entry or touch 'Cancel' to close
the numerical keyboard without saving the changes.
Press 'OK'.
6.
Press 'OK'.
7.
Change the number of sets
after you stopped the
Chapter 6 - Print jobs
149