Change The Job Settings Before Printing; Change The Number Of Sets - Canon imagePRESS C7011VPS series Operation Manual

Change the job settings before printing

Change the number of sets

Introduction
Follow the procedure below to change the number of sets for a job that is present in the list of
[Waiting jobs] or [Scheduled jobs], or in a [DocBox].
Procedure
1.
Touch [Jobs] -> [Waiting jobs] or [Scheduled jobs], or select a [DocBox].
2. Touch the job of which you want to change the number of sets.
NOTE
You can only change the settings of the active print job
[Stop] button
3.
Touch [Properties], or touch the job twice to open the [Properties] window.
4.
Touch the [Number of sets] button.
5. Enter the desired number of sets (between 1 and 65,000).
NOTE
Touch the arrow button <- to correct the previous entry or touch [Cancel] to close the numerical
keyboard without saving the changes.
6.
Press [OK].
7.
Press [OK].
two times).
Change the job settings before printing
after you stopped the printer (press the
Chapter 8 - Carry out print jobs 185