ZyXEL Communications ZyWall USG 50-H Series User Manual page 168

Chapter 8 Interface
Figure 137 Network > Interface > PPP > Edit > Configuration
Each field is explained in the following table.
Table 51 Network > Interface > PPP > Edit > Configuration
LABEL
General Settings
Enable Interface
Interface Properties
Interface Name
Zone
Base Interface
168
DESCRIPTION
Select this to enable this interface. Clear this to disable this interface.
This field is read-only and displays the name of the PPP interface. The format is
the name of the physical port followed by "ppp". For example, "wan1_pppoe".
This field is read-only and displays the name of the zone to which this PPP
interface belongs.
This field is read-only and displays the name of the interface upon which this
PPP interface is built.
ZyWALL USG 50-H User's Guide