ZyXEL Communications ZyWall USG 50-H Series User Manual page 633

Table 251 Port Grouping Logs
LOG MESSAGE
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
Port Group on %s is
changed. Renew DHCP
client.
Port Grouping %s has
been changed.
Table 252 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Table 253 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
ZyWALL USG 50-H User's Guide
DESCRIPTION
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is set to
DHCP client and only has one member. In this case the DHCP client
will be enabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has no members in its group. In this case the DHCP
client will be disabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has more than one member in its group. In this case
the DHCP client will renew. %s: interface name.
An administrator configured port-grouping, %s: interface name.
DESCRIPTION
Force user authentication will be turned on because HTTP server was
turned on.
Force user authentication will be turned off because HTTP server was
turned off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Appendix A Log Descriptions
633