How To Set Up A Wlan Interface - ZyXEL Communications ZyWall USG 50-H Series User Manual

5 Go to the Status screen. The Interface Status Summary section should contain a
"cellular" entry. When its connection status is "Connected" you can use the 3G
connection to access the Internet.
Figure 48 Status
The ZyWALL automatically balances the traffic load amongst the available WAN
connections. This enhances overall network throughput. Plus, if a WAN connection goes
down, the ZyWALL sends traffic through the remaining WAN connections. For a simple test,
disconnect all of the ZyWALL's wired WAN connections. If you can still access the Internet,
your cellular interface is properly configured and your cellular device is working.
To fine-tune the load balancing configuration, see
on page 120

6.4 How to Set Up a WLAN Interface

The ZyWALL includes wireless LAN (IEEE 802.11b/g/n). You can configure different
wireless LAN interfaces. This lets you have different wireless LAN networks using different
SSIDs. This example shows how to set the ZyWALL's WLAN to use IEEE 802.11g/n and
create a WLAN interface that uses WPA or WPA2 security and the ZyWALL's local user
database for authentication.
ZyWALL USG 50-H User's Guide
for an example.
Chapter 9 on page 217. See also
Chapter 6 Tutorials
Section 6.7
97