Ip/Mac Binding Monitor - ZyXEL Communications ZyWall USG 50-H Series User Manual

Table 105 Network > IP/MAC Binding > Exempt List (continued)
LABEL
End IP
Add icon
Apply

17.4 IP/MAC Binding Monitor

Click Network > IP/MAC Binding > Monitor to open the IP/MAC Binding Monitor
screen. This screen lists the devices that have received an IP address from ZyWALL interfaces
with IP/MAC binding enabled and have ever established a session with the ZyWALL. Devices
that have never established a session with the ZyWALL do not display in the list.
Figure 220 Network > IP/MAC Binding > Monitor
The following table describes the labels in this screen.
Table 106 Network > IP/MAC Binding > Monitor
LABEL
Interface
#
IP Address
Host Name
MAC Address
Last Access
Refresh
ZyWALL USG 50-H User's Guide
DESCRIPTION
Enter the last IP address in a range of IP addresses for which the ZyWALL does not
apply IP/MAC binding.
Click the Add icon to add a new entry.
Click the Remove icon to delete an entry. A window displays asking you to confirm
that you want to delete it.
Click Apply to save your changes back to the ZyWALL.
DESCRIPTION
Select a ZyWALL interface that has IP/MAC binding enabled to show to which
devices it has assigned an IP address.
This is the index number of an IP/MAC binding entry.
This is the IP address that the ZyWALL assigned to a device.
This field displays the name used to identify this device on the network (the
computer name). The ZyWALL learns these from the DHCP client requests.
This field displays the MAC address to which the IP address is currently assigned.
This is when the device last established a session with the ZyWALL through this
interface.
Click this button to update the information in the screen.
Chapter 17 IP/MAC Binding
285