The Configuration File Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

"exit" or "!'" must follow sub commands if it is to make the ZyWALL exit sub
command mode.
Line 3 in the following example exits sub command mode.
interface dmz
ip address 192.168.5.1
!
Lines 1 and 3 in the following example are comments and line 4 exits sub command mode.
!
interface dmz
# this is a note about the interface
!
Lines 1 and 2 are comments. Line 5 exits sub command mode.
! this is from Joe
# on 2008/02/26
interface dmz
ip address 192.168.5.1
!
Errors in Configuration Files or Shell Scripts
When you apply a configuration file or run a shell script, the ZyWALL processes the file line-
by-line. The ZyWALL checks the first line and applies the line if no errors are detected. Then
it continues with the next line. If the ZyWALL finds an error, it stops applying the
configuration file or shell script and generates a log.
You can change the way a configuration file or shell script is applied. Include
on-error off
the configuration file or shell script and applies all of the valid commands. The ZyWALL still
generates a log for any errors.

37.2 The Configuration File Screen

Click Maintenance > File Manager > Configuration File to open the Configuration File
screen. Use the Configuration File screen to store, run, and name configuration files. You can
also download configuration files from the ZyWALL to your computer and upload
configuration files from your computer to the ZyWALL.
ZyWALL USG 50-H User's Guide
in the configuration file or shell script. The ZyWALL ignores any errors in
Chapter 37 File Manager
setenv stop-
555