Transition Diagram Of Self-Diagnostic Mode Conditions - Toshiba FC-22 Manual

Warming up
Standby
[Power] OFF/ON
*2
Hand over to user
*1 : During the "Whole control-panel lighting mode", copying is not possible. But after pressing [CLEAR]
to make the copier ready, you can make copies.
*2 : After having used the self-diagnostic mode, be sure to turn OFF and then ON the power before
returning the copier to the customer.
January 2000 © TOSHIBA TEC
[Power] ON
Normal
[0][1]
[0][3]
*1
[CLEAR]
All the displays on
Test mode
the control panel lit

Transition diagram of self-diagnostic mode conditions

1 - 7
[0][5]
[0][8]
[0][4]
Adjustment mode Setting mode
Test print mode
FC-22 ADJUSTMENT