Procedure For Inputting Adjustment Values - Toshiba FC-22 Manual

[Procedure for inputting adjustment values]

In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification. By pressing the [ENERGY
SAVER] key, immediately after starting the adjustment mode "05", single-sided test copying can be
performed (normal copy mode).
<Operation keys>
0 5
POWER
1
Digital keys : Input codes.
START
Digital keys : Input adjustment
values.
( CLEAR Use to make corrections)
SET
Value ZZZ is stored
replacing values YYY.
or
INTERRUPT
ENERGY
SAVER
Test copy
START
If the test copy does not
satisfy the specified values,
return to the step 1 and
repeat the adjustment
procedure.
Power OFF/ON : Exit the adjustment mode.
FC-22 ADJUSTMENT
<Display>
A
100%
TEST MODE
XXX
100%
TEST MODE
YYY ZZZ
Current adjustment value
A
100%
TEST MODE
A
100%
Wait Warming Up
A
100%
COPYING
1 - 52
Varies with the code "XXX" entered with digital keys.
A3
Code No.
A3
Adjustment value newly input
(If no input, YYY is displayed.)
A3
A3
A3
January 2000 © TOSHIBA TEC