E13
Paper misfeed from the 1st cassette
E14
Paper misfeed from the 2nd cassette
E15
Paper misfeed from the 3rd cassette
E16
Paper misfeed from the 4th cassette
Open the side door; does any paper remain in the paper path from the cassette?
YES
NO
Is the harness between the LGC board and the cassette-feed jam sensor open-circuited?
Is the cassette-feed jam sensor connector or the connector J107 on the LGC board discon-
nected?
YES
NO
1. Replace the cassette-feed jam sensor.
2. Replace the LGC board.
E19
Paper misfeed from the LCF
Open the side door; does any paper remain in the paper path from the LCF?
YES
NO
Is the harness between the LGC board and the cassette-feed jam sensor open-circuited?
Is the cassette-feed jam sensor connector or the connector J107 on the LGC board discon-
nected?
YES
NO
1. Replace the cassette-feed jam sensor.
2. Replace the LGC board.
FC-22 TROUBLESHOOTING
Remove the paper.
Reconnect the connector. Replace the harness.
Remove the paper.
Reconnect the connector. Replace the harness.
4 - 4
January 2000 © TOSHIBA TEC