Toshiba FC-22 Manual page 212

"Code" provides with following information.
A. In the case of Program data("target" is 1), "code" means the destination.
SUC: for USA and Canada
SEU: for European countries
SX: for Australia and Asian countries
SJP: for Japan
B. In the case of UI data("target" is 2-6), "code" means Language.
Code
2
3
4
5
6
7
8
9
10
11
12
5. Select the area for update using ten keys.
Using [1] to [6] keys and [INTERRUPT] key, you can select a target area.
A selected number is displayed at target area. Press [INTERRUPT] to input "#".
The relation between target area number and firmware data is as follows.
1 : Program data
2 : Fixed UI data
3 : Common UI data
4 : 1st language UI data
5 : 2nd language UI data
6 : 3rd language UI data
#1 : All data (1, 2, 3, 4, 5 and 6)
#2 : All UI data (2, 3, 4, 5 and 6)
#3 : All language UI data (4, 5 and 6)
6.Press [START] key and copier starts to update the data.
Do not turn OFF the power of the copier or the computer, or disconnect the connection
between the copier and computer after pressing the START key.
Interrupting the transmission of a file to the copier will result in corrupting the file in F-
ROM of the copier. If this file is corrupted, you have to re-install the data again.
FC-22 FIRMWARE UPDATING
Language
Japanese
American English
English
reserved
French
German
Swedish
Dutch
Italian
Spanish
Danish
5 - 6
Code Language
13 Finnish
14 Norwegian
15 Australian English
16 Polish
17 Czech
18 Greek
19 Romanian
20 Bulgarian
21 Portuguese
22 Hungarian
23 reserved
January 2000 © TOSHIBA TEC