Preventive Maintenance Checklist - Toshiba FC-22 Manual

2. 2 Maintenance to be Performed
FC-22: Every 30,000, 60,000, 90,000 and 120,000 Copies
FC-15: Every 20,000, 40,000, 60,000 and 120,000 Copies
(1) Preparation
Discuss current machine conditions with the key operator and note them down.
Before starting maintenance, make a few sample copies by TCC-1 chart and save them for
later reference purposes.
Turn OFF the power switch, and be sure to unplug the copier.
(2) Perform preventive maintenance following the checklist shown below. During maintenance, refer to
the illustrations attached and the Service Manual as required.
(3) After having finished the maintenance, plug in the copier, turn ON the power switch, and make a few
copies to confirm that the copier is working normally.

2. 3 Preventive Maintenance Checklist

Symbols used in the checklist (For FC-22)
Cleaning
A Cleaning with alcohol
Cleaning with soft pad,
cloth or vacuum cleaner
Symbols used in the checklist (For FC-15)
Cleaning
A Cleaning with alcohol
Cleaning with soft pad,
cloth or vacuum cleaner
FC-22 PREVENTIVE MAINTENANCE
Coating
W White grease 30
(Molycoat) 60
AV Alvania No.2 90
120 Every 120K
>
Coating
W White grease 20
(Molycoat) 40
AV Alvania No.2 60
120 Every 120K copies
>
2 - 2
Replacing Operation check
Every 30K copies
After cleaning
Every 60K copies
or replacing,
Every 90K copies check for no
abnormality.
copies
Replace if
deformed or
damaged
Replacing Operation check
Every 20K copies After cleaning
Every 40K copies
or replacing,
Every 60K copies
check for no
abnormality.
Replace if
deformed or
damaged
January 2000 © TOSHIBA TEC
Date
User's name
Serial No.
Inspector's
name
Remarks
Date
User's name
Serial No.
Inspector's
name
Remarks