Poor Fusing - Toshiba FC-22 Manual

(8) Poor fusing

Cause/Defect area
Fuser lamp unlighted
Fuser roller pressure defect
Thermistor, LGC board
Paper
FC-22 TROUBLESHOOTING
Step Check items
1 Contact defect at terminal point?
2 Fuser lamp open-circuited?
3 Pressure springs working properly?
4 Fuser roller temperature too low?
5 Paper dump?
Correct it.
Replace it.
Check/adjust pressure springs.
Check/correct related circuit.
Change paper.
4 - 64
Measures
January 2000 © TOSHIBA TEC