Ai Mode Setting - Toshiba FC-22 Manual

1. 12 AI Mode Setting

(a) AI mode discrimination setting
Select the discrimination level in the AI mode as follows:
Code Adjustment item
678 AI mode
Discrimination setting
(b) AI mode time-out setting
Set the maximum processing time allowable during the AI mode. Two kinds of setting are made, one for
originals of A4 or smaller sizes, and the other for originals larger than A4.
Note: In case discrimination does not finish, stop AI mode discrimination and copy in the selected copy mode.
Code Adjustment item
682 AI mode
Time-out setting
FC-22 ADJUSTMENT
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn ON the
power.
(2) Input code [678] with digital keys.
(3) Input an appropriate setting value:
0 : Standard (for regular)
1 : Photograph priority
2 : Only judgement of original type
3 : Only judgement of original type with photograph pri-
ority
4 : No AI discrimination
(4) Press [SET] icon or the [INTERRUPT] key to store the
adjustment value.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn ON the
power.
(2) Input code [682] with digital keys.
(3) Input an appropriate setting value:
The setting value should be two digits; the lower digit is
the time-out period (seconds) for A4 original size, and
should be in the range of 1 to 9. The upper digit is the
time-out period for A3 original size, and should be in the
range of 1 to 9. However, time is set in proportion to
original sizes for originals larger than A4, based on A4
or A3 setting value.
(4) Press [SET] icon or the [INTERRUPT] key to store the
setting value.
1 - 72
Content
Content
January 2000 © TOSHIBA TEC