Automatic Adjustment Error Of Bin Inside Paper Sensor - Toshiba FC-22 Manual

CCA Automatic adjustment error of bin inside paper sensor
After having retried automatic adjustment of the bin inside paper sensor, is there any abnormal-
ity found?
NO
Complete.
YES
Is the connector J12 on the sorter controller board connected normally?
NO
Insert the connector J12 properly.
YES
Replace the sorter controler board.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
YES
Check if the bin inside paper sensor is installed securely.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
YES
Replace the bin inside paper sensor.
After having tried automatic adjustment of the bin inside paper sensor, is there
any abnormality found?
YES
January 2000 © TOSHIBA TEC
After having tried automatic adjustment of the bin inside paper
sensor, is there any abnormality found?
NO
Complete.
YES
NO
Complete.
NO
Complete.
NO
Complete.
4 - 43 FC-22 TROUBLESHOOTING