2.5.3 Installation Procedure
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Turn off the main power switch [1] of the host machine and disconnect the power plug [2] from the outlet.
2) Remove the rear cover [1].
- Screws, 4 pcs.
3) Remove the screw [1] from the card reader.
4) Remove the screw [1] and the tooth washer securing the ground cable, and then separate the card reader [3] from the card reader mount [2].
[2]
[1]
F-2-48
F-2-49
MEMO:
The removed screw will be used later.
[1]
F-2-50
[1]
[2]
F-2-51
[1]
[3]
Chapter 2
0017-5546
2-21