Removing Reader Components; Removing Parts At The Left Of The Reader - Canon iR2030 Series Service Manual

2.7.3 Removing Reader Components

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Open the ADF/copyboard cover.
2) Remove the right glass holder [2] of the reader.
- Screws [1], 2 opcs.
3) Remove the document deck glass [3].
4) Remove the front cover [5] of the reader.
- Screws [4], 2 pcs.

2.7.4 Removing Parts at the Left of the Reader

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
The work procedure for removing the parts at the left of the reader differs between the machine with a copyboard cover and the machine with a DADF. Follow the
appropriate procedure.
a. Machine with a Copyboard Cover
Installation precautions are as follows:
- Do not touch the top surface of the contact sensor.
- Be careful not to allow foreign objects to enter the reader unit.
- Do not stain the stream reading glass.
- Be careful not to touch grease on the shaft, when moving the
contact sensor, etc.
[4]
[2]
[5]
F-2-90
[3]
[1]
[4]
Chapter 2
0017-5559
0017-5560
2-41