Fan Filter; Removing The Fan Filter (Non Duplex Unit) - Canon iR2030 Series Service Manual

Chapter 9
4) Disconnect the relay harness [2] from the connector [1].
5) Disconnect the ground cable [3].
- Screw [4], 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
[5]
7) Remove the transfer/registration unit [1].
- Screw [2], 4 pcs.
[1]
[2]
9-12
[3] [4]
[6]
[1]
[2]
F-9-41
[2]
F-9-42
8) Remove the duplex unit [1] from the left door.
- Screw [2], 6 pcs.
[2]
[2]
9) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
[1]
10) Remove the fixing heart discharge fan [1].

9.4.10 Fan Filter

9.4.10.1 Removing the Fan Filter (Non Duplex Unit)

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
[1] [2]
[2]
F-9-43
[2]
F-9-44
[1]
F-9-45
0017-8798