Pressure Roller; Removing The Pressure Roller; Fixing Film; Removing The Fixing Film Unit - Canon iR2030 Series Service Manual

9) Detach the heater harness cover [2]. Disconnect the connector [3].
- Screw [1], 1 pc.
[2]
[3]
[1]
10) Disconnect the two connectors [1], and then release the fixing unit har-
ness from the wire saddles [2].
[1]
11) Raise the delivery upper guide [1]. Remove the fixing unit [3].
- Screw [2], 3 pcs.
[2]

8.4.2 Pressure Roller

8.4.2.1 Removing the Pressure Roller

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Remove the fixing unit.
2) Remove the fixing film unit.
F-8-11
[2]
F-8-12
[1]
[3] [2]
F-8-13
3) Raise the claw [1] of the fixing unit inlet guide, and remove the slide the
fixing unit inlet guide [2] by sliding it in the direction of the arrow.
4) Remove the pressure roller [3].
- E-ring [1]
- Gear [2]
[1]
When installing the pressure roller, bring the ground plate [4] into contact
with the roller shaft [5].
0017-8925

8.4.3 Fixing Film

8.4.3.1 Removing the Fixing Film Unit

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Remove the fixing unit.
[2]
[1]
F-8-14
[3]
F-8-15
[4] [5]
F-8-16
Chapter 8
[2]
0017-8163
8-9