When installing the electrode plate [1], place it under the three claws [2] as
shown below.
[1]
8.4.5 Fixing Film Sensor
8.4.5.1 Removing the Fixing Film Sensor
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Remove the fixing unit.
2) Disconnect the connector [1], release the two hooks [2], and then remove
the film sensor [3].
[3]
[2]
F-8-35
[1]
[2]
F-8-36
0017-8169
Chapter 8
8-13