Canon iR2030 Series Service Manual page 245

9) Remove the gear unit [1] and gear [2].
- E-ring [3], 1 pc.
[1]
10) Pull out the handle [1] at the back of the machine, remove the screw [2],
and then remove the stopper [3].
11) Remove the harness [1] from the wire saddle [2].
- Connectors [3], 2 pcs.
[1]
[2]
[2] [3]
F-9-18
[2]
[1] [3]
F-9-19
[3] [3]
F-9-20
12) Remove the handle unit [1].
- Screw [2], 3 pcs.
[2]
13) Release the gear stopper [1] from the shaft, and then remove the gear [2].
Chapter 9
[1]
[2]
F-9-21
[2]
[1]
F-9-22
9-7