Chapter 2
20) Using the three harness covers (lids) [2], secure the repeating harness B [1] to the harness covers (bases).
21) Using a nipper, remove the precut portion [1] of the rear cover as shown below.
22) Attach the rear cover with the repeating harness B routed through the cut portion [1] of the rear cover.
2.5.4 Registering the Card IDs
iR2018 / iR2022
2-26
[2]
[1]
F-2-66
F-2-67
F-2-68
After installing the card reader-E1, register the card
numbers to be used in the service mode of the host machine.
If they are not registered, cards will not be recognized when
inserted.
[1]
[1]
0017-5552