Canon iR2030 Series Service Manual page 121

4) From the rear of the host machine, insert the cassette heater [1] in the slot [2] in the host machine.
5) Secure the cassette heater [1].
- Screw [3], 1 pc.
6) Pass the cassette heater harness [4] in the wire saddle (large) [5], edge saddle [6], and wire saddle (small) [7].
7) Connect the connector of the cassette harness to the connector [8].
8) When attaching the cassette heater to the first optional cassette [1], perform step 9 after attaching it.
When installing the cassette heater, exercise care so that the
harness is caught in other parts.
Route the cassette heater harness [4] behind the harness [9].
[1]
[1]
[8] [7]
F-2-105
[2]
[1]
[3]
[6] [5] [4]
[9]
Chapter 2
2-49