Registration Roller; Removing The Registration Roller; Removing The Registration Clutch - Canon iR2030 Series Service Manual

5) Remove the feed guide [1].
- Screw [2], 2 pcs.
6) Detach the multifeeder connector cover [1].
- Connector [2], 3 pcs.
7) Remove the multifeeder unit [1].
- Screw [2], 4 pcs.
[1]
[2]
[1]
[2]
F-7-37
[2]
[1]
F-7-38
F-7-39
8) Remove the harness from the guide.
- connector [1], 1 pc.
9) Remove the multifeeder pickup solenoid [2].
- Screw [3], 1 pc.
[2]

7.5.11 Registration Roller

7.5.11.1 Removing the Registration Roller

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
door.
3) Draw out the drum unit.
4) Remove the two metal plates [1], and remove the registration roller [2].
- Screw [3], 2 pcs.
[3] [1]
[2] [3]
7.5.12 Registration Clutch

7.5.12.1 Removing the Registration Clutch

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1)Detach the rear cover.
Chapter 7
[3] [1]
F-7-40
[2]
[1]
F-7-41
0017-8581
0017-8582
7-15