Overall Construction (Ip-423); Tools Required - Konica Minolta IP-423 Service Manual

HOME
I

Overall Construction (IP-423)

G

Tools Required

• Standard screwdriver
• Spanner or needle-nose pliers
• PLCC pull-out tool
PostScript3 (protection chip : PS-345)
Expansion memory (MU-404/405)
Printer I/F board
Caution
• Be sure to unplug the power cable, not only to turn the copier's main
power switch OFF, before attempting to make servicing.
• Avoid making servicing the copier with the print controller outfitted.
Caution
• Before engaging in Disassembly / Reassembly, check to make sure that
all the cables are unplugged from the print controller.
• Use in-magnetized tools in Disassembly / Reassembly to prevent the
hard disk being affected.
• There are occasions when boards are damaged if no appropriate
grounding measures are taken. Wear a wrist strap or others during ser-
vicing.
• Disassembly / Reassembly should be made on cushioning materials.
Chapter 2 Disassembly / Reassembly
Cooling fan motor
Hard disk (field option)
CPU
Compact Flash
2-5