Safety Warnings - Konica Minolta IP-423 Service Manual

HOME
SAFETY AND IMPORTANT WARNING ITEMS

SAFETY WARNINGS

[1] MODIFICATIONS NOT AUTHORIZED BY KONICA
Konica controllers for copier are renowned for their high reliability. This reliability is achieved through high-qual-
ity design and a solid service network.
Print controller units design is a highly complicated and delicate process where numerous mechanical, physical,
and electrical aspects have to be taken into consideration, with the aim of arriving at proper tolerances and
safety factors. For this reason, unauthorized modifications involve a high risk of degradation in performance and
safety. Such modifications are therefore strictly prohibited. The points listed below are not exhaustive, but they
illustrate the reasoning behind this policy
•
Using any cables or power cord not specified by Konica.
•
Using any fuse or thermostat not specified by Konica. Safety will not be
assured, leading to a risk of fire and injury.
•
Disabling fuse functions or bridging fuse terminals with wire, metal clips,
solder or similar object.
•
Disabling relay functions (such as wedging paper between relay contacts).
•
Disabling safety functions (interlocks, safety circuits, etc.) Safety will not be
assured, leading to a risk of fire and injury.
•
Making any modification to the
Konica.
•
Using parts not specified by Konica.
S-2
PROHIBITED ACTIONS:
print controller units unless instructed by