Options; Postscript3 (Ps-343/345); Expansion Memory (Mu-404/405/411); Hard Disk (Field Option) - Konica Minolta IP-423 Service Manual

HOME
I

Options

See "Print Controller specification" for details on which printer controllers support each of the options.
G

PostScript3 (PS-343/345)

Installing the optional PostScript3 chip and Compact Flash enables copiers to be used as PostScript3 print-
ers.
G

Expansion Memory (MU-404/405/411)

Increasing the amount of memory enables the print controller to handle larger data files and improves print
performance.
G

Hard Disk (field option)

Installing the optional hard disk for the print controller lets the copier work as a scanner. The scanned data
can be by accessed computers via the network.
Operating Conditions
Card Type :
Power supply voltage :
Current consumption :
Safety approvals :
Recommended products
The following hard disks have been checked by Konica and found to be compliant.
Manufacturer
TOSHIBA
IBM
Caution
Do not install memory other than that specified.
PCMCIA Type1 or Type2
3.3V+/-0.15V (Stand-alone operation)
500mA max.
The following certifications must have already been acquired
• UL Recognized Component (NWGQ2)
Standard: UL1950 or UL60950
• C-UL or CSA Recognized Component (NWGQ2)
Standard: CSA c22.2 No.950 or CSA c22.2 No.60950
• TÜV-GS
Standard: EN 60950
Product name
PAMHD002
PAMHD005
DSCM-11000
Caution
The system software (VxWorks) used in the print controller can handle disk
capacities up to 2 GB.
When a hard disk larger than 2 GB is connected, the hard disk capacity dis-
played on the copier operation panel or [Config. Data] is 2 GB.
Capacity
2GB
5GB The area that can actually be used is up to 2 GB.
1GB A PC card adaptor is required.
Chapter 1 Overview
Remarks
1-7