Konica Minolta IP-423 Service Manual page 15

HOME
[3] MEASURES TO TAKE IN CASE OF AN ACCIDENT
1. If an accident has occurred, the distributor who has been notified first must immediately take
emergency measures to provide relief to affected persons and to prevent further damage.
2. If a report of a serious accident has been received from a customer, an on-site evaluation must
be carried out quickly and Konica Corporation must be notified.
3. To determine the cause of the accident, conditions and materials must be recorded through
direct on-site checks, in accordance with instructions issued by Konica Corporation.
4. For reports and measures concerning serious accidents, follow the regulations given in "Serious
Accident Report/Follow-up Procedures."
[4] CONCLUSION
1. Safety of users and customer engineers depends highly on accurate maintenance and adminis-
tration. Therefore, safety can be maintained by the appropriate daily service work conducted by
the customer engineer.
2. When performing service, each print controller units on the site must be tested for safety. The
customer engineer must verify the safety of parts and ensure appropriate management of the
equipment.
SAFETY AND IMPORTANT WARNING ITEMS
S-9