G Removal / Installation Of Hard Disk; G Removal / Installation Of Postscript3 (Protection Chip) - Konica Minolta IP-423 Service Manual

HOME
G
Removal / Installation of Hard Disk
1.
Remove Compact Flash.
Refer to "Removal / Installation of Compact Flash".
2.
Remove hard disk.
G
Removal / Installation of PostScript3 (Protection Chip)
1.
Remove 8 screws, and remove the board cover.
Refer to "Removal / Installation of Compact Flash".
2.
Remove the PostScript3 protection chip using a PLCC pull-out tool.
Caution:
Installation
Be sure to use a Konica approved hard disk.
Caution
The PostScript3 protection chip is sensitive to static electricity. Handle it with
care.
Caution:
Installation
See the silk on the board, and align the corner of the chip with that of the
socket and insert the PostScript3 chip.
Chapter 2 Disassembly / Reassembly
Hold this area and pull.
Do not touch the surface
of the disk.
PLCC pull-out tool
2-3