HOME
I
Components on the Printer I/F Board (IP-423)
G
Parts Side
G
Pattern Side
EEPROM: Network Configuration DATA maintenance
Slide Switch Functions
Normally, no need to change switch settings.
SW1:
I
Initializing the (field optional) Hard Disk
If the hard disk does not operate correctly, format the disk. You can format the hard disk from the [Main
Menu] in the LCD display on the copier.
For more information, refer to the print controller User's Manual.
Gate Arrey 1
(KPC01)
Green LED
Amber LED
RJ-45 Ethernet
Network Port
Parallel Port
Reset to factory default setting
Caution
• When the hard disk is formatted any scan data, confidential data, PC-Fax
reception data stored on the disk will be erased. In addition, the printer set-
ting and controller settings will be reset the factory default settings.
• If the PostScript3 option has been installed, the font stored on the hard
disk will also be erased.
EEPROM
Gate Arrey 2
SW1
Clock Chip for
Network Control
Network
Control CPU
Clock Chip for
Network Control CPU
Relay Connector
Appendix
Flash ROM
for Network
Network Control
Memory
Appendix-9