Konica Minolta IP-423 Service Manual page 12

HOME
SAFETY AND IMPORTANT WARNING ITEMS
•
When installing the copier / print controller units, read the Installation
Guide thoroughly. Be sure to install the copier /
level and sturdy place.
Constant vibration will cause problems.
•
Be sure to lock the caster stoppers of copier / print controller units.
In the case of an earthquake and so on, the copier / print controller units
may slide, leading to a injury.
•
Before conducting an inspection, read all relevant documentation (service
handbook, technical notices, etc.) and proceed with the inspection follow-
ing the prescribed procedure, using only the prescribed tools. Do not
make any adjustment not described in the documentation.
If the prescribed procedure or tool is not used, print controller units may
break and a risk of injury or fire exists.
•
Before conducting an inspection, be sure to disconnect the power plugs
from the copier and
When the power plug is inserted in the wall outlet, some units are still
powered even if the POWER switch is turned OFF. A risk of electric
shock exists.
•
The area around the fixing unit is hot.
You may get burnt.
DANGER: Work Performed with the Copier / Print controller units Powered
•
Take every care when making adjustments or performing an operation
check with the copier / print controller units powered.
If you make adjustments or perform an operation check with the external
cover detached, you may touch live or high-voltage parts or you may be
caught in moving gears or the timing belt, leading to a risk of injury.
•
Take every care when servicing with the external cover detached.
High-voltage exists around the drum unit. A risk of electric shock exists.
S-6
CAUTION: Vibration
CAUTION: Inspection before Servicing
.
print controller units
in a
print controller units