HOME
G
Removal / Installation of Hard Disk
1.
Remove Compact Flash.
Refer to "Removal / Installation of Compact Flash".
2.
Remove hard disk.
G
Removal / Installation of PostScript3 (Protection Chip)
1.
Remove 3 screws, and remove the board cover plate /A.
Caution:
Installation
Be sure to use a Konica approved hard disk.
Caution
The PostScript3 protection chip is sensitive to static electricity. Handle it with
care.
Chapter 2 Disassembly / Reassembly
Hold this area and pull.
Do not touch the surface
of the disk.
2-7